How To Get Better Looking & Stronger 3D Prints, More Easily & Reliably.
Without Printer Hassle, Fails or Ugly Imperfections
No subscription. No contract. Instant, complete access - even at 2am!
Let me ask you a question...
SELECT ALL THAT APPLY
Are you...
If you selected any of the above, keep reading...
Unfortunately, 3D Printers Rarely Just Work "Out Of The Box"
But here's the thing...
You wouldn't tolerate a mobile phone that was complicated to use, only worked "some of the time" or produced a sub-standard image...
So why accept it from your 3D printer?
Here are just a few of the frustrating problems that you've likely experienced getting your printer to just work reliably:
Struggling With 3D Print Quality
It's a common problem to experience seemingly unexplainable quality issues and numerous troubleshooting faults, like Ghosting, Stringing, Layer Shifting, and prints generally not looking as good as you'd like, or finishing reliably.
These are not things you have to live with, though.
First Layer Problems
There's little worse than prints not sticking to the bed, general 1st layer problems or those hugely frustrating warp issues creeping in later near the end of the print...
But unlocking the key to the first layer holds many secrets, and can impact several seemingly unrelated issues later in the print.
Controlling The Variables
Layer heights, infill densities, parimeters, nozzle widths, printing widths; there are numerous variables for your 3D prints that affect how it looks, how strong it is, how reliable it prints - everything.
Stop guessing what variables you choose in your slicer affect certain aspects of your print. It doesn't have to be forever "trial and error" - that's a long route to frustation.
Extrusion Difficulties
Under or over extrusion can happen at any time - and the potential causes are numerous.
Gaps in your prints, weak layer adhesion, or even excess filament being extruded are all common yet easily avoided issues when learning how to use your 3D printer.
Why do nozzles sometimes block and don't others? How do you stop it from happening, and how can you prevent it from happening again? Let us guide you so that these time consuming issues are a thing of the past.
Because here's the truth...
95% of getting great prints, reliably, is all down to what you do before you click "print"
And NOT spending hours after the fault, trying to fix it.
If only you could setup your printer the right way, so that each print looked brilliant, every time.
We should know, we've been helping thousands of people to get great results with their printer reliably, since 2014...
Unfortunately, 3D Printers Rarely Just Work "Out Of The Box"
But here's the thing...
You wouldn't tolerate a mobile phone that was complicated to use, only worked "some of the time" or produced a sub-standard image...
So why accept it from your 3D printer?
Here are just a few of the frustrating problems that you've likely experienced getting your printer to just work reliably:
Struggling With 3D Print Quality
It's a common problem to experience seemingly unexplainable quality issues and numerous troubleshooting faults, like Ghosting, Stringing, Layer Shifting, and prints generally not looking as good as you'd like, or finishing reliably.
These are not things you have to live with, though.
First Layer Problems
There's little worse than prints not sticking to the bed, general 1st layer problems or those hugely frustrating warp issues creeping in later near the end of the print...
But unlocking the key to the first layer holds many secrets, and can impact several seemingly unrelated issues later in the print.
Controlling The Variables
Layer heights, infill densities, parimeters, nozzle widths, printing widths; there are numerous variables for your 3D prints that affect how it looks, how strong it is, how reliable it prints - everything.
Stop guessing what variables you choose in your slicer affect certain aspects of your print. It doesn't have to be forever "trial and error" - that's a long route to frustation.
Extrusion Difficulties
Under or over extrusion can happen at any time - and the potential causes are numerous.
Gaps in your prints, weak layer adhesion, or even excess filament being extruded are all common yet easily avoided issues when learning how to use your 3D printer.
Why do nozzles sometimes block and don't others? How do you stop it from happening, and how can you prevent it from happening again? Let us guide you so that these time consuming issues are a thing of the past.
Because here's the truth...
95% of getting great prints, reliably, is all down to what you do before you click "print"
And NOT spending hours after the fault, trying to fix it.
If only you could setup your printer the right way, so that each print looked brilliant, every time.
We should know, we've been helping thousands of people to get great results with their printer reliably, since 2014...
Join over 2,100 people who've already mastered their 3D printer...
Let us show you our fool-proof methods to setup and operate your 3D printer the right way, so it always produces prints like this...
So that you can spend more time enjoying the fun of making and creating, instead of getting frustrated and deflated, forever "tinkering"
Just imagine getting predictable results from your printer:
How would that affect how much you 3D print?
What could you now use your printer for?
How much time would it save you over the coming months and years?
How much filament would it save you?
How much more value will you get out of the machine you've already spent hundreds or even thousands on, so far?
Stop imagining and make it your reality...
INTRODUCING
The Complete Confusion-Free Guide To 3D Printing Mastery Course
It’s the manual your 3D printer should have come with.
The essential course for those who have progressed beyond wanting to do it all themselves, and just want the full step by step system to get setup correctly, so each print can just work as it should and look as good as it should.
Take Control Over Your Printer
(Instead Of Feeling Like Its The Other Way Around)
Using the clear-cut methods in this course, we’re going to give you the skill set to prevent problems before they arise through the proper operation of all aspects of your printer.
We’ll show you how to spot things that aren’t correctly setup (that the un-trained eye would miss), how to set it up correctly - and we’ll even explain the reasons behind why, so that you can see how each aspect of printing affects other areas.
Sometimes “random” problems can have wildly different, seemingly un-connected causes - but through our easy-to-follow guides you’ll discover how to swiftly resolve even the most unusual faults or troubleshooting problems.
Here’s a sample of what’s covered in The Complete Confusion-Free Guide To 3D Printing Mastery course when you enroll today:
-
The huge importance of why you need a perfectly level bed (and how it affects seemingly unrelated issues).
-
Our fool proof method for how to check how close to “absolute trammed” it actually is - including the little known “ready state” you need before checking.
-
Common bed leveling myths, why inaccurate methods are so common and the best way to ensure a perfect level, every time.
-
Why an automatic level alone often isn’t good enough, and our mounting methods to ensure it stays level.
-
Exactly when you benefit from using a removable surface, and when it’s just a gimmick.
-
We compare all bed surfaces, so you know which is the right one for your printer, materials and models - and which to always avoid.
-
Don’t get caught with the frustration of using the wrong adhesion helper for your setup - with our easy to follow checklist.
-
The instant-yet-critical fix for weak, warped or droopy looking prints.
-
Get our process to always ensure your heated bed is running at the optimal temp for your material, adhesion helper and surface (and what might happen if you don’t get this right).
-
Our method for perfectly fine tuning temperature and getting cooling right so you never get cracking, blocked nozzles, sagging or weak prints again.
-
Why you need (and how) to get the layer height perfect for your nozzle and speed, with the finish quality and strength you desire.
-
Our Master Technique to ensure optimal printer calibration, so your printed parts are always dimensionally accurate to a fraction of a millimeter (yes in glorious metric precision!).
-
Less is more; how reducing infill can allow for lighter but actually even stronger prints - and the 2 best infill patterns to use and which to always ignore.
-
How to customise the density of a model in your slicer to reinforce areas that need to be stronger - without impacting printing time or filament used much.
-
We bust 4 common retraction and stringing myths, and we break down these must-follow guidelines instead.
-
Get this little-known process to get perfectly smooth finishes on complex prints (prepare to be amazed).
-
Why you should always minimize supports, how best to do that - and the method for optimising the supports you choose to keep for ease of printing and removal.
-
The 5 most important things to avoid and 2 “golden rules” to always ensure, when printing with supports.
-
Our pre-print checklist so you always know what to look out for before clicking print (ignoring this only invites mid-print fails and imperfections).
-
Learn the advanced techniques for orientation to; speed up, use less material, get better finish quality and actually improve strength (yes, it’s really that important).
-
How to take a “good” quality 3D print and turn it into the very best it can be with your machine (you’ll be shocked at what even budget printers are capable of).
-
The last 5% - Our step by step advanced method to fine tune for perfection.
-
Get our favourite method for rapid, foolproof fault finding & fixing.
-
And much more!
Gaining These Skills Gives You Two Powerful Advantages:
#1 You get far LESS fails & imperfections
We'll show you everything you need to get great results from your printer, so fails and imperfections become all-but a thing of the past.
#2 You can fix any faults FASTER
You'll know exactly what causes what, so you can fix issues as they arise with confidence.
Here's how we do that:
In these detailed, easy-to-follow modules, each containing 3-5 video lessons...
MODULE 1
Ultimate Bed Leveling Perfection
It all starts here. But this is different to the regular advice you get online that you should just "make sure your bed is levelled".
There are many issues that can be resolved before they happen by just ensuring bed levelling perfection.
We won't just show you exactly how to get a perfectly levelled bed (and how to spot them when they're close, but not) we'll also show you how to keep it that way.
MODULE 2
Effortless Bed Surfaces & Adhesion Method
There are many surfaces and surface adhesions others swear by, but how do you know what materials and surface types to use with which filaments?
Unfortunately, you can't just use one bed adhesive, with one surface for all materials and instances. We explain when to use certain adhesives, with which surfaces and which filaments.
Once you've completed these two foundational modules, issues with getting prints to stick will be a thing of the past & you'll have perfect first layers.
MODULE 3
Optimised Temperature & Cooling
Incorrect temperatures can block filament extrusion, create hidden weaknesses in your prints, cause ugly imperfections or a host of other issues that can "spring up" when you least expect them.
Don't get caught-out printing too cold, or hot for the material, model and environment you're printing in. Discover how to always make sure these are tuned exactly right with this step by step guide.
MODULE 4
Slicer Setup & Settings Blueprint
The Slicer software is the master control panel for your printer. Most of how you want to print is decided in this tool.
Without understanding the information inside this module, you risk unknowingly setting yourself up for print fail after fail.
We'll show you everything from "how to slice your first print" through to exactly what settings effect what.
So you can always make sure you're printing with the best settings for your model, filament and printer.
MODULE 5
The Misunderstood Secrets of
Print Orientation
There's a lot more to print orientation than just what way up makes it the easiest to print. There's a bit of science to it; that's why we've dedicated a whole module to it.
Master this with any print, and you'll be able to always maximise finish quality and part strength while maintaining an easy print - reliably.
Without a solid grasp on this concept, you'll be hard pressed to get the most from your printer.
MODULE 6
Master Print Optimisation
Once we've shown you how to get good results, reliably from your 3D printer - let us show you how to really get the best from your machine by fine tuning to get picture perfect results.
We don't believe in "settling" - so that's why we've created this module to guide you through to get enviable results that look the very best they can, from your printer.
Once you've discovered our tune-up methods in this module, you'll have the quality of prints you always wanted - and you won't need to settle for imperfections, again.
PLUS
Get These Additional BONUSES Included
🎁 BONUS 1
Ultimate, Unbiased 3D Printer Buyer's Guide - Worth $29.95
Most 3D printer buyer's guides online are over-simplistic, biased or just plain wrong. We show you all the factors you need to consider when choosing the right 3D printer for what you want to print and your budget.
Don't buy your next printer before considering the cost and frustration-saving advice within these pages!
INCLUDED FREE (DOWNLOAD)
🎁 BONUS 2
Entire Deep-Dive Masterclass Library
- Worth $297
We simply cannot over state the sheer value of these hyper-specific masterclasses. Each one takes you by the hand to improve aspects of your 3D printing not covered elsewhere.
10 Topics covered, like; building your own filter enclosure, printing (& reading) temperature towers, how to use custom supports, how to unblock nozzles (and prevent them) and so many more!
Each one is easy to follow, yet will give you the additional advanced skills you need to make the very most of your 3D printing.
INCLUDED FREE
This All Sounds Amazing, But What's The Investment?
Combined Value of
The Complete, Confusion-Free Guide To 3D Printing Mastery Course - Worth $497
The Ultimate 3D Printer Buyers Guide - Worth $29.95
Our Entire Masterclass Library - Worth $297
Total Value: $823.95!
TODAY'S SPECIAL OFFER
Get the bonuses FREE!
Just pay $497 for the course - Saving $326.95
Enroll today, and you’ll get instant access to the whole master 3D printing course, including those excellent bonuses to give you complete confidence and control over your 3D printer.
Stop wishing your printer worked better; get the skills you need to have perfect prints, reliably - TODAY.
Click below to gain access for this crazy one-off low price
(And get to keep the bonuses even if you choose to get your money back, for whatever reason - yes, really!)
One-Time Payment. No Contracts. Guaranteed Instant Access - even at 2am!
Course Is Relevant For All Entry & Consumer Grade FDM 3D Printers; Including Prusa, Creality, Ultimaker, Anet, Anycubic, Monoprice, Flashforge, Artillery and many more.
#1 You get far LESS fails & imperfections
We'll show you everything you need to get great results from your printer, so fails and imperfections become all-but a thing of the past.
#2 You can fix any faults FASTER
You'll know exactly what causes what, so you can fix issues as they arise with confidence.
Here's how we do that:
In these detailed, easy-to-follow modules, each containing 3-5 video lessons...
MODULE 1
Ultimate Bed Leveling Perfection
It all starts here. But this is different to the regular advice you get online that you should just "make sure your bed is levelled".
There are many issues that can be resolved before they happen by just ensuring bed levelling perfection.
We won't just show you exactly how to get a perfectly levelled bed (and how to spot them when they're close, but not) we'll also show you how to keep it that way.
MODULE 2
Effortless Bed Surfaces & Adhesion Method
There are many surfaces and surface adhesions others swear by, but how do you know what materials and surface types to use with which filaments?
Unfortunately, you can't just use one bed adhesive, with one surface for all materials and instances. We explain when to use certain adhesives, with which surfaces and which filaments.
Once you've completed these two foundational modules, issues with getting prints to stick will be a thing of the past & you'll have perfect first layers.
MODULE 3
Optimised Temperature & Cooling
Incorrect temperatures can block filament extrusion, create hidden weaknesses in your prints, cause ugly imperfections or a host of other issues that can "spring up" when you least expect them.
Don't get caught-out printing too cold, or hot for the material, model and environment you're printing in. Discover how to always make sure these are tuned exactly right with this step by step guide.
MODULE 4
Slicer Setup & Settings Blueprint
The Slicer software is the master control panel for your printer. Most of how you want to print is decided in this tool.
Without understanding the information inside this module, you risk unknowingly setting yourself up for print fail after fail.
We'll show you everything from "how to slice your first print" through to exactly what settings effect what.
So you can always make sure you're printing with the best settings for your model, filament and printer.
MODULE 5
The Misunderstood Secrets of
Print Orientation
There's a lot more to print orientation than just what way up makes it the easiest to print. There's a bit of science to it; that's why we've dedicated a whole module to it.
Master this with any print, and you'll be able to always maximise finish quality and part strength while maintaining an easy print - reliably.
Without a solid grasp on this concept, you'll be hard pressed to get the most from your printer.
MODULE 6
Master Print Optimisation
Once we've shown you how to get good results, reliably from your 3D printer - let us show you how to really get the best from your machine by fine tuning to get picture perfect results.
We don't believe in "settling" - so that's why we've created this module to guide you through to get enviable results that look the very best they can, from your printer.
Once you've discovered our tune-up methods in this module, you'll have the quality of prints you always wanted - and you won't need to settle for imperfections, again.
PLUS
Get These Additional BONUSES Included
🎁 BONUS 1
Ultimate, Unbiased 3D Printer Buyer's Guide - Worth $29.95
Most 3D printer buyer's guides online are over-simplistic, biased or just plain wrong. We show you all the factors you need to consider when choosing the right 3D printer for what you want to print and your budget.
Don't buy your next printer before considering the cost and frustration-saving advice within these pages!
INCLUDED FREE (DOWNLOAD)
🎁 BONUS 2
Entire Deep-Dive Masterclass Library
- Worth $297
We simply cannot over state the sheer value of these hyper-specific masterclasses. Each one takes you by the hand to improve aspects of your 3D printing not covered elsewhere.
10 Topics covered, like; building your own filter enclosure, printing (& reading) temperature towers, how to use custom supports, how to unblock nozzles (and prevent them) and so many more!
Each one is easy to follow, yet will give you the additional advanced skills you need to make the very most of your 3D printing.
INCLUDED FREE
This All Sounds Amazing, But What's The Investment?
Combined Value of
The Complete, Confusion-Free Guide To 3D Printing Mastery Course - Worth $497
The Ultimate 3D Printer Buyers Guide - Worth $29.95
Our Entire Masterclass Library - Worth $197
Total Value: $823.95!
TODAY'S SPECIAL OFFER
Get it all for just $497
(Saving Over $300!)
Enroll today, and you’ll get instant access to the whole master 3D printing course, including those excellent bonuses to give you complete confidence and control over your 3D printer.
Stop wishing your printer worked better; get the skills you need to have perfect prints, reliably - TODAY.
Click below to gain access for this crazy one-off low price
(And get to keep the bonuses even if you choose to get your money back, for whatever reason - yes, really!)
One-Time Payment. No Contracts. Guaranteed Instant Access - even at 2am!
Course Is Relevant For All Entry & Consumer Grade FDM 3D Printers; Including Prusa, Creality, Ultimaker, Anet, Anycubic, Monoprice, Flashforge, Artillery and many more.
SPECIAL OFFER - Save Over $300 Today
Become A Master Of Your 3D Printer
What You're Getting Today:
✔️ A detailed tutorial setting up your printer, the right way (from step 1)
✔️ Our course instructor will guide you through getting your first prints
✔️ You'll learn what common mistakes people make that cause faults later
✔️ You'll get our methods for checking over prints before you click start
✔️ Your printer will be setup correctly, so that it runs reliably.
✔️ We'll then help you tune it so your prints look great, are as strong as
they can be and are dimensionally accurate.
✔️ And you'll learn how to fix faults if they do occur, so you're never
paralysed from an unruly printer that's hard to fix.
✔️ And of course, so much more...
--- Course Worth $497! ---
PLUS
✔️ BONUS #1 - Ultimate, Unbiased 3D Printer Buyer's Guide (Worth $29.95)
✔️ BONUS #2 - Entire MasterClass Library (Worth $297)
--- Bonuses Worth $326.95! ---
Total Value Worth $823.95
Today Get The Course (And Bonuses) For Just $497
(SAVE OVER $300!)
Get instant access - even at 2am, guaranteed.
Sounds great, but why can’t I just find this stuff online or “YouTube” it?
Great question, that's what we used to wonder, too.
Your 3D Printer is a brilliantly powerful tool, but there’s just not a lot of good information out there on the right way to use it properly.
And by that we mean, where you know how to setup prints the right way, so you can just click print - and you get great results.
Most tutorials online are either out of date or assume you have certain knowledge already - its just damn frustrating.
Sure, there are a couple of walk throughs showing off certain aspects, and some people online that use it for bits and bobs share their hacks - but no one is sharing the full story, every last thing you need to know - in order...
But we know what your printer is really capable of.
Yes, even budget machines can produce fantastic results when they're operated correctly.
Printer faults can spring seemingly out of nowhere and take hours or longer to fix.
Mastering your printer will put you in control, and finally give you the key to unlock your 3D printer’s capabilities so you can use it to make all the amazing stuff you always wanted to.
Without taking the short amount of time it’ll take you to race through this powerful, yet condensed course, you’ll be stuck in the "always hoping my print will finish nicely" stage - never full confident that you can trust it to give you predicatable results.
So invest in your own education to save countless hours, filament and frustration, today.
What our students say...
I have learned a lot from this course that I know will improve my 3D printing career.
I love how detailed Adam is in his evaluations.
Excellent tips. I am still "learning" about the extrusion multiplier number.
I had no idea that even a 1% change could make a difference!
I wanted to thank you guys for covering Nylon.
It's helped set you guys apart from other 'how to get started' YouTube videos.
The Ultimate Resource For The 3D Printing Enthusiast...
That doesn't cost you an arm and a leg.
Benefits
Step-by-Step Courses
Files To 3D Print And Follow-Along With
Consistent & Qualified Advice
Library Of Detailed PDF Guides & Books
Learn From Home, Anytime
Personal Tutor to Help You Tune Profiles
Follow Along Worksheets & Checklists
Supportive Community
100% Moneyback Guarantee
College Course
Sometimes
Sometimes
Sometimes
Sometimes
Sometimes
$1,900 - $15,800
YouTube/Forums
Sometimes
Sometimes
"Serious Makers Don't Rely On YouTube Alone. The Institute of 3D Printing Provides The Right Information, From The Right Source, In The Right Order!"
How do I know if this is right for me?
Have you ever felt frustrated that your printer didn’t ‘work as it should’?
If so, you are not alone.
Unfortunately, as you probably know by now, 3D printers rarely work as they’re supposed to right out of the box. But that doesn’t mean they can’t work reliably and give you brilliant results.
That’s because; not getting the results you want from your machine is not your fault.
You may have been sold a wonderful machine of limitless potential (which it is) but you were never given the skills to properly use it how it could or how it should be used.
This is due to 3D printer manufacturers selling to “early adopters” in recent years. These people are used to going the long haul, trying to figure it all out on their own - they love spending a lot of time fixing things.
But for the rest of us, we don’t want to spend hours fixing things only to get sub-standard results, and only half of the time.
We want to use the printer to create all the brilliant stuff we imagined we wanted to make when we bought it. Using it to enrich and customise all areas of our and others' lives.
We want to use a 3D printer to it’s full potential.
If you relate to this feeling of unmet potential, then this course is for you.
Become A Master Of Your 3D Printer
What You're Getting Today:
✔️ A detailed tutorial setting up your printer, the right way (from step 1)
✔️ Our course instructor will guide you through getting your first prints
✔️ You'll learn what common mistakes people make that cause faults later
✔️ You'll get our methods for checking over prints before you click start
✔️ Your printer will be setup correctly, so that it runs reliably.
✔️ We'll then help you tune it so your prints look great, are as strong as
they can be and are dimensionally accurate.
✔️ And you'll learn how to fix faults if they do occur, so you're never
paralysed from an unruly printer that's hard to fix.
✔️ And of course, so much more...
--- Course Worth $497! ---
PLUS
✔️ BONUS #1 - Ultimate, Unbiased 3D Printer Buyer's Guide (Worth $29.95)
✔️ BONUS #2 - Entire MasterClass Library (Worth $297)
--- Bonuses Worth $326.95! ---
Total Value Worth $823.95
Today Get The Course (And Bonuses) For Just $497
(SAVE OVER $300!)
Get instant access - even at 2am, guaranteed.
YOU ARE PROTECTED BY OUR
30 DAYS MONEY BACK GUARANTEE
We want you to get what you need to get from this course. So if you feel you haven't, or even if you just don't like it for any reason, let us know within 30 days and we'll give you a full refund.
We'll even let you keep the bonuses, as a gesture of goodwill. Because we believe we should take on the risk, not you.
That's right, no risk to you - that's how confident we are that you'll love this course.
We believe you should invest in yourself with confidence, so we're happy to take on the risk so you can focus on getting the results you want.
Ed Tyson
Founder, The Institute of 3D Printing
Frequently Asked Questions
Here are a few answers to our most common questions
Why should I get training for my 3D printer?
3D Printers can seem like complex and unruly creatures, if not used correctly. But they're also mechanical, which means when you take the steps to ensure it's setup in the right way, you will get a machine that produces impressive results, reliably.
The problem is, that most people only get piecemeal tips and tricks, without knowing how everything affects everything else with your printing (even seemingly unrelated stuff). Going this trial and error route is infinitely more frustrating and time-consuming than just getting the skills you need and forgoing all the frustrating troubleshooting.
Don't let the anxiety of wondering (hoping?) that your print will finish OK put you off using it for all the great stuff you've always wanted to print. Get our proven, time tested methods to get the best results from your printer, effortlessly.
How long will the course take to complete?
How long it will take you to complete the course, vs how long it will take you to get significant value from the course are two very different questions.
We've had people invest in the course and within hours message us back saying it's already had significant benefits for their printing, that they hadn't been able to achieve from other sources.
Each video lesson is compact, so you'll start to get time, filament and frustration saving techniques a short way into the content. You can go through everything methodically (advised) or if you're short on time, just skip to the lessons you need right now and come back to the others later.
The full training for The Complete Confusion-Free Guide to 3D Printing Mastery course is condensed to just 4.5 hours long in total and is fully comprehensive in what is covered.
What if I don't have time right now - do I keep access?
Great question! We get that people can have busy lives. That's why while there is a genuine time limit on the offer today, there's no time restriction on when or how fast you complete the trainings - you can keep the recordings for life.
How much time do you waste when an unexpected fault arises, not just the hassle of restarting the print, but the hours of confusing searching online for a remedy, that still might not work.
Wouldn't you rather have the complete skill set needed to quickly print anything you want, with the confidence it's going to turn out great?
With our condensed, easy to follow step by step trainings you can work through at your own pace. Invest in this program and you'll have access to the content ongoing, for one super-low fixed price.
What if I don't like the course, or change my mind?
We believe in honest business practice. What that means is, we're so confident you'll get a ton of value from this unparalleled 3D Printing Mastery training that we're happy to take on all the risk.
If for whatever reason you don't like the training - just get in touch within 30 days of purchase and we'll refund you if you feel you've not got value from it, or for whatever reason you've changed your mind.
Dosen't matter if it's 29 days, 23 hours and 59 minutes after you've bought it, our 100% moneyback guarantee still stands.
As a parting gift - you'll even get to keep access to the bonuses! Yes, really - if you don't feel you got value from the purchase, we insist you keep the bonuses (value $326.95) so that there's absolutely no hard feelings.
Can't I just get all this stuff off Youtube?
Free sites like Youtube can be useful, but they don't contain all the information you need. List of "top 7 things to do with your printer" won't help you master it, they're likely just give you enough information to get frustrated at all the stuff you don't know.
We set out to create the most comprehensive training course for desktop FDM 3D printing available, so that someone can follow it step by step, to get great results, easily and in record time - all without wondering what to do next, or in what order.
We don't assume anything, so everything is explained in plain English, without jargon so that anyone can follow on from the complete beginning.
Who should or should not take this course?
Who should take this course:
Anyone whose brand new to 3D printing (even if you don't have a 3D printer yet it's good to be prepared!) or has been printing a while but either doesn't feel confident using it, or is not getting the results they want reliably.
Anyone who just wants to save time, so they won't get caught out with every little frustrating fail that happens.
Anyone whose getting OK results, but they know they could be better and want to get the best results their printer is capable of.
Who should not take this course:
If you know absolutely everything there is to know about 3D printing and do not see how you can learn from others who have helped thousands before you.
Will I be able to watch these videos off-line if required?
Yes, we understand that sometimes internet connections can be patchy so we have enabled this feature within the login area.
Which 3D printers is this course for?
We've taken extensive steps to make the course universally relevant for all entry & consumer grade FDM 3D printers, with many specific issues for various printers covered; Including Prusa, Creality, Ultimaker, Anet, Anycubic, Monoprice, Flashforge, Artillery and many more.
Is this different to your 3D Printer Mastery trainings inside The Institute of 3D Printing training suite?
There are sections that are updated, but fundamentally this is the same course that you can find in our training suite. However this is a stand alone price, with bonuses and no monthly subscription fee. Pay just once and you get to keep the course - including any free updates in future as we release them.
Is this a subscription product, or is there any catch to this offer?
No, this is a complete stand-alone course. The price you see is what you pay, and it's a one-time investment.
We're offering at such a great discount for a short period of time to make it accessible to the most amount of people we can. We want to help as many people as possible get more control over exactly what they print, and how they print it, and we felt this fantastic offer was the best way to do that.
Do I need a 3D printer to get started?
While most people taking this course will already have a 3D printer, it makes perfect sense to invest in the course before your 3D printer arrives. Doing so will give you the confidence to start using it correctly to begin with, and print files the right way. It's always best to start as you mean to go on.
Do we get updates to this course in future included in this price?
Yes! Any updates we make to this course in future will be included. We invest heavily in keeping our content up to date. As we update in future, you will get access automatically (no extra charge). We periodically update our content, so you can be confident it's relevant.
What exactly does the 30 day money back guarantee mean?
Exactly what it says. If you buy the course, and for whatever reason you're not happy within 30 days of ordering (if it's 29 days, 23 hours and 58 minutes after) just let us know and if you'd like a refund you can have one.
We don't believe in keeping your money if you're not fully satisfied. So we want to make this an entirely risk-free investment for you.
SPECIAL OFFER
The Complete Confusion-Free Guide To 3D Printing Mastery
This course will teach you, step by step, how to master your 3D printer to complete reliability - simply!
$497
PLUS Bonuses Worth $326.95! Included FREE
(And Get To Keep The Bonuses Even If You Choose To Claim Your Money Back, For Any Reason - So There's No Risk To You)
One-Time Payment. Get Instant, Complete Access - even at 2am!
Here are some of the things students are saying about our courses:
