Without knowing how to Slicer files, you can't use a 3D printer. Most people only know how to do the absolute basics with their Slicer, just to get a print. But what if you knew what Slicer settings would improve printing reliability, finished part strength, finish quality, or reduce printing time for every single print you create. 

Imagine the hours of printing time, wasted filament and print fail frustration all saved just by knowing how to avoid these? Not to mention, having better looking & stronger prints.

The three Slicers covered at Cura, PrusaSlicer and Simplify 3D - these are the most powerful Slicers available (the first two are completely free to use). 

Better to start now, then waste time. 

How long it will take you to complete the course, vs how long it will take you to get significant value from the course are two very different questions. 

Each video lesson is compact, so you'll start to get time, filament and frustration saving techniques a short way into the content. You can go through everything methodically (advised) or if you're short on time, just skip to the lessons you need right now and come back to the others later. 

The full training for each Slicer are between 3.5 - 5 hours long in total and are fully comprehensive in what they cover. 

Great question! We get that people can have busy lives. That's why while there might be a time limit on the offer today, there's no time restriction on when or how fast you complete the trainings.

How much time do you waste when an unexpected fault arises, not just the hassle of restarting the print, but the hours of confusing searching online for a remedy, that still might not work. 

Wouldn't you rather have the complete skill set needed to quickly Slicer your next print in minutes, with amazing results each time? 

With our condensed, easy to follow step by step trainings you can work through at your own pace. Invest in this program and you'll have access to the content ongoing, for one low fixed price. 

We believe in honest business practice. What that means is, we're so confident you'll get a ton of value from these Slicer trainings that. we're happy to take on all the risk. If for whatever reason you don't like the training - just get in touch within 30 days of purchase and we'll refund you if you feel you've not got value from it, or for whatever reason you've changed your mind. 

Dosen't matter if it's 29 days, 23 hours and 59 minutes after you've bought it, our 100% moneyback guarantee still stands. 

Free sites like Youtube can be useful, but they don't contain all the information you need. List of "top 7 things to do on a slicer" won't help you master the slicer, they're likely just give you enough information to get frustrated at all the stuff you don't know. 

We set out to create the most comprehensive training course for FDM 3D printer slicers available, so that someone can follow it step by step, to get great results, easily and in record time - all without wondering what to do next, or in what order. 

We don't assume anything, so everything is explained in plain English, without jargon so that anyone can follow on from the complete beginning. 

Yes! While this is not our official certification course (we have a separate certification program for that), yes you will get a certificate to confirm you've gone through the whole course. There is no test, however. 

Who should take this course: 

Anyone whose brand new to 3D printing (even if you don't have a 3D printer yet it's good to be prepared!) or has been printing a while but either doesn't feel confident operating the Slicer OR feels they could get better results from their 3D printer. Even if you're happy with the results, you can always learn more to slash printing time or filament usage. 

Who should not take this course: 

If you know absolutely everything you need to know about the Slicer, and 3D printing already - and you're fully confident there's no room for improvement. OR if you're someone whose only looking for quick fixes and "hacks" - while we do have lots of these too, we believe in teaching for full comprehension, so we explain the reasons behind our methods so you can harness this knowledge in a highly practical and capable way. 

Yes, we understand that sometimes internet connections can be patchy so we have enabled this feature within the login area. 

While we can't list absolutely everything covered in this course (we'd be here for ages...) here's all the important stuff that's definitely covered:

For PrusaSlicer:

• Solid foundations & getting setup

• Configuration of NON-Prusa printers

• Mastering the Plater

• Optimal Print settings for different models & your goals
  

• Optimal Filament settings for different materials

• Optimal Printer settings for finish quality & reliability

• Using the Advanced Plater

• Choosing Layers & Perimeters (Shells)

• The best infil settings for your model

• When & how best to use a Skirt & Brim

• Making use of different Support Materials

• Accelerating Speed Without Accelerating faults

• Mastering the Advanced Print settings to save time

• Mastering the Advanced Filament settings to increase reliability

• Mastering the Advanced Printer settings to improve finish quality

• AND getting to grips with all the Expert versions of above!

• Covering all the "General" settings

• When, why & how to use custom G-Code

• Why Modifiers are so powerful

• Get full control of supports with Support Blockers & Enforcers

• How to Import, Export & Save projects

• Why, When & Exactly How to Flash Firmware to upgrade

• And so much more...

For Simplify 3D:

• Intro on getting setup properly

• The differences between Basic & Advanced modes

• Making full use of the Extruder tab

• Optimising the Layer tab to get the best strength & detail combination

• Breaking down the real reason behind the "Additions" tab

• Mastering the Infil tab to reduce weight while increasing strength

• Supports are the devil - here's how (& why) you need to control them

• Tuning new materials with the Temperature tab

• How to use the right cooling for the right mode & material

• When & how you need to manipulate the G-code

• Why you should be using the Scripts tab

• Optimising with the Speeds tab

• What exactly should you be using the "Other" tab for

• Our top time-saving tricks in the "Advanced" tab

• Our fool-proof process to add new filaments the right way

• How to duplicate & position to save your and your printing time

• The best support strategies & positioning tricks to minimise post-print finishing and failure rates

• Understanding "Processes" & how they can save you time

• Why "The Variable Settings Wizard" is truly magical

• And so much more...

For Cura: 

• Getting setup & your first prints
  

• Intro to advanced settings

• Our strategy for Improving quality

• Changing shells for strength, weight & finish quality

• Choosing infill density & patterns for strength & save weight

• Optimising for materials - do some materials have to be harder to print than others? Hint; they don't!

• Getting the speed right

• What's travel & how best to use it

• Mastering cooling for different features & materials

• Supports can cause issues, here's how to master them

• Covering "Special" modes and when you need to use them

• We show you how to use the experimental settings that are actually worth it

• And so much more...

There are sections that are updated, but fundamentally this is the same course that you can find in our training suite. However this is a stand alone price, with bonuses and no monthly subscription fee. Pay just once and you get to keep the course - including any free updates in future as we release them. 

Not at present, but when you finish you will receive a digital certificate of completion. 

No, this is a complete stand-alone course. The price you see is what you pay, and it's a one-time investment. We're offering at such a great discount for a short period of time to make it accessible to the most amount of people we can. We want to help as many people as possible master their slicer, and we felt this fantastic offer was the best way to do that. 

While most people taking this course will already have a 3D printer, it makes perfect sense to invest in the course before your 3D printer arrives. Doing so will give you the confidence to start using it correctly to begin with, and print files the right way. It's always best to start as you mean to go on. 

We cover Cura, PrusaSlicer and Simplify 3D slicers in unparalled levels of detail. We cover each slicer completely relevant to that slicer, but in a way that is very transferable to most slicers available. Many settings are similar across slicers, so much of the information you will learn will be cross compatible. 

Why not increase your 3D printing capability by learning a completely new slicer today?

Yes! Any updates we make to this course in future will be included. We invest heavily in keeping our content up to date. As we update in future, you will get access automatically (no extra charge). We periodically update our content, so you can be confident it's relevant. 

Exactly what it says. If you buy the course, and for whatever reason you're not happy within 30 days of ordering (if it's 29 days, 23 hours and 58 minutes after) just let us know and if you'd like a refund you can have one. 

We don't believe in keeping your money if you're not fully satisfied. So we want to make this an entirely risk-free investment for you.